ETEKCITY JPD-FR100+ User Manual page 10

Note: Make sure to dry the ear canal and keep the
sensor contact with ear canal for better temperature
result accuracy.
Fever Alert: W hen measuring temperature in either
of the two modes, the thermometer will sound 7 short
ticks and the LCD display will flicker if the reading
EN
results exceed 37.5°C / 99.5°F to indicate that the
subject may have a fever.
Auto -Off: I f left idle for 10 seconds, the thermometer
will shut off automatically to conserve battery lifetime.
Memory Recall
1. When the thermometer is on standby, press and hold
the 'F2' button for 4 to 8 seconds. The LCD screen
will display ' - - - M' w ith the 'M' letter blinking.
2. Press 'F2' once more and the LCD screen will display
data with a corresponding icon indicating what
mode the results are under.
Unit Conversion
While the device is off, press and hold 'F2' for 8 to 12
seconds. The current unit of measurement will appear.
Press 'F2' once more to change and select the desired unit.
NOTE: W hile holding the 'F2' button, the memory
interface will first appeal. Keep holding the button until
the unit changing interface appears.
10