Advertisement
Table of Contents
Phone
800.757.2581
STL Trigger-Beam LED Flashlight Instruction Manual
Product structure:
Technical parameter:
Dimension
Weight
Light source
Beam brightness
Rechargeable Battery
Non-rechargeable
batteries
Outer casing material
Surface treatment
Lens material
Cruising Time
Operation：
1.
Battery Installation，Twist the end cap off, slide the 18650 battery positive
upward into the flashlight and twist on the end cap to secure the battery.
2.
Gently push the Back switch to change between high, low and strobe
functionality on the flashlight.
3.
Press the back switch in all the way to power the flashlights on & off.
Charging:
1.
Rotate the grab handle counter-clockwise until the circular plug is fully
accessible.
2.
Plug in the flashlight charger to the flashlight and the light on the wall or car
charger plug in will activate showing the charge is in effect.
3.
The flashlight will need to be in the on position in order for the flashlight to
charge, the light indicator on the charger will turn red when the flashlight is in
2809 Business Park Dr
•
Fax 844.894.2652
5.7"L x 1.34" lamp diameter x 1.02" handle diameter
130G
CREE high-power LED
220 Lumens
18650 Rechargeable lithium battery
(2) 123 Size Batteries
Aluminum 6061-T6
Titanium black
FCL lens
100% Brightness-186 minutes, 10% Brightness-3300 minutes
•
Buda
•
Texas •78610
•
Email customerservice@speedtechlights.com
Advertisement
Table of Contents
Related Manuals for STL Trigger-Beam
Summary of Contents for STL Trigger-Beam
- Page 1 Buda • Texas •78610 • • Phone 800.757.2581 Fax 844.894.2652 Email customerservice@speedtechlights.com STL Trigger-Beam LED Flashlight Instruction Manual Product structure: Technical parameter: 5.7"L x 1.34" lamp diameter x 1.02" handle diameter Dimension Weight 130G Light source CREE high-power LED Beam brightness...
- Page 2 2809 Business Park Dr • Buda • Texas •78610 • • Phone 800.757.2581 Fax 844.894.2652 Email customerservice@speedtechlights.com the on position meaning the flashlight is charging and not yet fully charged. The light indicator will turn green once the flashlight is fully charged. (Click the power button on the flashlight to ensure it was in the correct position while charging) 4 Hours = Full Charge.
Need help?
Do you have a question about the Trigger-Beam and is the answer not in the manual?
Questions and answers