Clearing The Memory; Date & Time Setting; How To Program - Sanyo ECR 160 Instruction Manual

(
Clearing the Memory
At the time of purchase of this unit, the memory
contents may be in a random state. They should be
cleared before using the machine.
Key: Z or Ps key
Position: Z
(
Clearing all totals except non- )
resettable total and reset counter.
Note: Random may be printed out.
Date
&
Time Setting
Key: X, Z or Ps key
Position: X or PS
EX) Date March 25, 1982
cp~~@J~~~
G
1--:
1
tEnter in order of Year, Month and Day.
C t
1
F1:
Prints order of Month, Day and Year.
C
0 ~ ro ·~2: Prints order of Day, Month and Year.
0
e 3: Prints order of Year, Month and Day.
Key: Ps key
Position: PS
Time 13:41
[D~~GJ
0
c=
Enter in 24-hour system.
Once set, the date and time will be printed out on the
receipt and journal every time it is issued. ·
9-
How to Program
Read this manual carefully to program the
machine to the most preferable set-up according
to your store system.
Key: Ps key
Position: PS
1. Control Data for Department
I
a:@- Non-single-item non-taxable
1 - Single-item non-taxable
2 - Non-single-item taxable
[~
. 3 - Single-item taxable
8- Discount (Dept. 2 only)
(
In case of%+, Mode)
a: 0 - Non-single-item
1 - Single-item
b: Entry-limited digits (1 - 7)
7
(
In case of Discount mode (a 8), )
Entry limit digits are valid only for
manual amount discount.
2. Discount Dept. Rate
(Tax
Mode only)
EJDD0~
(0- 99%)