Page 1
YOUR SOURCE FOR DIVER NAVIGATION AND UNDERWATER RELOCATION EQUIPMENT RJE International, Inc. 15375 Barranca Pwky, Ste I-112, CA 92618 Ph: (949) 727-9399 Fax: (949) 727-0070 RJE International, March 22, 2018 Email: sales@rjeint.com Website: rjeint.com TAC-100A Revision 6 TAC-100A Revision 6...
Page 2
TAC-100A MAINTENANCE The TAC-100A is a very reliable piece of equipment and needs very little service. It is recommended that the board be rinsed with fresh wa- ter after every dive, wiped down with a clean cloth, and stored in a cool, dry place.
Page 3
100A could result in serious injury or death. • Modes Do not use the TAC-100A or any of its com- C = Press button to move from one mode to an- ponents until you have read and fully under- other. See flow below.
Page 4
Obligation un- make the adjustment, rotate the thumb wheel at side of gauge so that der this warranty is limited to repair or, at the sole discretion of RJE the “zero” dial marker is even with the depth indicator.
Page 5
0-80ft and the TAC-100AM that uses the TAC-DG/25M metric you to maintain your course heading. depth gauge that reads from 0-25M. The TAC-100A is supplied in a padded carrying bag (p/n TAC100-4). Illuminating the compass can be achieved in two ways. One is to shine a bright light on the compass card for several minutes.
Page 6
Bend the chem-light stick until the glass cap- Now let’s plot a dive to see how the TAC-100A really works. We are sule is broken and shake.
Need help?
Do you have a question about the TAC-100A and is the answer not in the manual?
Questions and answers