MoreBeer KEG400 Instructions For Use

Homebrew draft system cornelius kegs

Advertisement

Kit Includes:

• 5 Gallon Rebuilt Keg
• 5lb Empty CO2 Tank
• Dual Gauge Regulator
• Beer & Gas Line Assemblies
Instructions For Use:
A) Secure a tall glass of beer as this can be a thirsty job. This will be the last time you have to pour from a can
or a bottle. Beer on tap is moments away.
1) Connect your dual gauge regulator to the 5 lb CO
regulator as you may split the built-in gasket if too much force is applied. The gauge that goes to 2000 lbs
psi is your tank gauge and tells you how much gas is left in your tank. A normal 5 lb CO
600–1000 lbs psi of pressure when filled, depending on the temperature the tank is stored in. The gauge that
goes to 60 psi is your outgoing gauge and tells you what amount of pressure is being released into the keg.
2) You are now ready to adjust the pressure on the tank. Open the valve on top of the CO
the valve counter clockwise. Now find the silver knob in the middle of the regulator body. This is called the
adjustment knob and is in a loose position for shipment. Using your hand, thread in the adjustment knob
clockwise until the needle on the low pressure gauge (0–30 psi) begins to read. This adjustment is good for
now, we will fine tune the pressure later.
3) On the rubber top of your keg, near the valves (also called posts or body connects), the words "In" and
"Out" are stamped. Attach the grey quick connect to the "In" valve for the CO
nect to the "Out" valve for the beverage.
4) After everything is connected, you will need to fine tune your CO
ered the norm, but different beers might have different requirements and ultimately your preference will rule.
You increase the outgoing pressure by turning in the adjustment knob. In reverse, by loosening the knob, you
decrease the pressure.
www.MoreBeer.Com • 1–800–600–0033 • A MoreFlavor, Inc. Company
www.MoreBeer.Com • 1–800–600–0033 • A MoreFlavor, Inc. Company
Homebrew Draft System
MoreInstructions
Cornelius Kegs
tank with a crescent wrench. Do not overtighten the
2
pressure. Usually 8–12 lbs psi is consid-
2
Product# KEG400
tank will hold from
2
tank by turning
2
. Attach the black quick con-
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KEG400 and is the answer not in the manual?

Questions and answers

Summary of Contents for MoreBeer KEG400

  • Page 1 You increase the outgoing pressure by turning in the adjustment knob. In reverse, by loosening the knob, you decrease the pressure. www.MoreBeer.Com • 1–800–600–0033 • A MoreFlavor, Inc. Company www.MoreBeer.Com • 1–800–600–0033 • A MoreFlavor, Inc. Company...
  • Page 2 • 1-800-823-0010 • A MoreFlavor, Inc. Company www.MoreBeer.Com • 1–800–600–0033 • A MoreFlavor, Inc. Company...
  • Page 3 2.21 2.27 Volumes Of Co2 More Info on Kegging For more in-depth information on kegging, please see our manual on “Kegging” located in the MoreManuals section of our learning center at www.MoreBeer.com. www.MoreBeer.Com • 1–800–600–0033 • A MoreFlavor, Inc. Company...

Table of Contents