1. Introduction The AC-DA210-HDBT is a 2 HDMI in, 8 HDBaseT out + 2 HDMI local output switch splitter. This switch splitter allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc...) to be shown on any of the connected displays.
48V2A power supply for powering AC-DA210-HDBT 6. Operation controls: Switching: The AC-DA210-HDBT can be switched from the front panel by pressing the “Input” button. This switches back and forth from Input 1 and Input 2 EDID management: Pressing and holding the button for more than 3 seconds will enter an EDID management mode.
To the remote (HDBaseT Receiver) end by inserting an IR Receiving Eye into the IR In port on the AC-DA210-HDBT. Back out of the IR Out port on the AC-DA210-HDBT by placing an IR Receiving Eye in the AC-EX70-UHD Receiver’s IR In port Directly from a control system using a cable as designed below.
Thank you for choosing AVProEdge! Please contact us with any questions. We are happy to be of service! A V P r o E d g e 2 2 2 2 E 5 2 n d S t r e e t N ~ S i o u x F a l l s , S D 5 7 1 0 4 1 - 8 7 7 - 8 8 6 - 5 1 1 2 ~ 605- 2 7 4 - 6 0 5 5 su p por t @ a v p r o e d g e .
Need help?
Do you have a question about the AC-DA210-HDBT and is the answer not in the manual?
Questions and answers