USING THE Intelli-studio PROGRAM
Using the Intelli-studio program built into your
camcorder, you can transfer video and photo
files to your PC and edit them on your PC screen.
Intelli-studio offers the most convenient way for
you to manage your video and photo files.
Step 1. Connecting the USB plug
1. Set "PC Software: On." page 57
•
This is the default setting.
2. Connect the built-in USB plug of the camcorder to the USB port
of the PC.
•
A new file saving screen appears with the Intelli-studio main
window.
•
Depending on your version of Windows, the removable disk
window also appears.
3. Click "Yes." The uploading procedure starts. Click "Yes" to
confirm.
•
If you do not want to save a new file, select "No."
To disconnect the USB plug.
To disconnect the USB plug after completing the file transfer, you must follow these steps:
1. Click the "Safely Remove Hardware icon" icon on the taskbar.
2. Select "USB Mass Storage Device," and then click "Stop."
3. If the "Stop a Hardware device" window appears, click "OK."
4. Disconnect the camcorder's built-in USB plug from the PC.
•
Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction.
•
Use the AC power adaptor to power the camcorder when transferring files to your computer.
•
When the built-in USB plug is connected, turning the camcorder on or off may cause the PC to
malfunction.
•
If you disconnect the built-in USB plug from the PC or the camcorder while transferring files, the
data transmission will stop and the data may be damaged.
•
If you connect the built-in USB plug to a PC via a USB HUB or simultaneously connect the built-
in USB plug along with other USB devices, the camcorder may not work properly. If this occurs,
remove all USB devices from the PC and reconnect the camcorder.
•
Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer,
open the drive that corresponds to your camcorder, find Intelli-studio, and then run IStudio.exe.
Settings
PC Software
Off
TV Display
On
Default Set
Menu
Move
Exit
61