Connecting to a computer
Symptom
The computer does not recognise
your camcorder.
Cannot play a video file properly on
a PC.
Intelli-studio does not function
properly.
Intelli-studio is not performed.
The image or sound on your
camcorder is not played on your
computer properly.
The playback screen is paused or
distorted.
146
Explanation/Solution
•
Disconnect the USB cable from the computer and camcorder,
restart the computer, then connect it again correctly.
•
A video codec is needed to play the file recorded on your
camcorder. Install the software provided with your camcorder.
pages 132
•
Make sure you insert the connector in the correct direction, and
connect the USB cable to the USB jack on your camcorder
firmly.
•
Disconnect the cable from the computer and camcorder, restart
the computer. Connect it again properly.
•
To play back an HD video file, a computer with better
specification is required.
Check a computer with recommended specification. page 151
•
Exit the Intelli-studio application, and restart the Windows
computer.
•
Set PC Software to On in the Settings menu or install
Intelli-studio in the computer. pages 125
•
Video playback or sound may stop temporarily depending
on your computer. The video or sound copied to your
computer is not affected.
•
If your camcorder is connected to a computer that does
not support Hi-speed USB (USB2.0), the image or sound
may not be played correctly. The image and sound
copied to your computer are not affected.
•
Check the system requirements to play a video.
•
Exit other all applications running on the current
computer.
•
If a recorded video is played on your camcorder
connected to a computer, the image may not play
smoothly, depending on the transfer speed. Please copy
the file to your PC, and then play it back.
~
135