Starting The Multi Slide Show; Start The Multi Slide Show; Selecting Images - Samsung ES25 User Manual

Starting the Multi Slide Show (

Images can be displayed continuously at preset intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
1. Press the play mode button and press the MENU button.
2. Press the Up / Down button and select the [Multi Slide Show]
menu tab and press the OK button.

Start the Multi Slide Show

The Multi Slide Show can start only in the [Start] menu.
1. Use the Up / Down button to select the [Start] menu and press
the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[Play] : The Multi Slide Show is
closed after one cycle.
[Repeat] : The Slide show is repeated
until cancelled.
3. Press the OK button and the slide show will be started.
- To pause the slide show while playing it back, press the OK
button again.
- Pressing the OK button again will cause the Multi Slide Show
restart.
- To stop playback of the Multi Slide Show, press the OK button,
and then press the Left or Right button.
)

Selecting Images

You can select image to view
1. Use the Up / Down button to select the
2. Select a desired sub menu by pressing
Start
Play
Images :All
Repeat
Effect :Off
Interval :1 sec
Music :Off
Back Set
3. Select [Play] or [Repeat] in the [Start] menu to start the multi slide
[Images] menu and press the Right
button.
the Up / Down button.
[All] : All images saved on the
memory are played back.
Press the OK button and the settings are saved.
[Date] : Images taken in a specified date are played back.
Press the OK button and the settings are saved.
[Select] : Play only the selected images. If you press the Up /
Down button, you can select the desired images to play
back. The selected image can be saved as [Select1],
[Select2] and [Select3]. If you save the selected image
with the [New Select] command, it will be saved as
[Select1]. But when a new image is saved again using
[New Select], the former image which had been saved
as [Select1] will be saved as [Select2] automatically.
You can change and cancel the images which were
saved as [Select1], [Select2] and [Select3]. Press the
Fn button and the settings are saved.
show.
Start
Images :All
All
Effect :Off
Date
Interval :1 sec
Select
Music :Off
Back Set
069