Table of Contents
Advertisement
advanced recording
Focus
The camcorder usually focuses on a subject automatically (auto focus). When you turn the
camcorder on, focus is always set to automatic. You can also manually focus a subject.
PRECHECK!
Select the record mode by pressing the MODE button.
1. Touch the Menu (
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit (
Submenu items
Auto: In most situations, it is better to use the automatic focus feature, as it
enables you to concentrate on the creative side of your recording.
Manual (
): You may need to focus manually under certain conditions that
make automatic focusing diffi cult or unreliable.
Touch (
Touch Point (
): To focus on a subject shown on the LCD screen, simply
touch the subject on the screen.
Focusing manually during recording
This camcorder automatically focuses a subject from close-up to
infi nity. However, the camcorder may not focus correctly, depending
on the recording conditions. In this case, use the manual focus mode.
Focusing on a nearer subject
To focus on a nearer subject, touch the nearer
subject (
) tab.
Focusing on a further subject
To focus on a further subject, touch the further
subject (
) tab.
center when focus adjustment reaches the end.
the (
) or (
) tab.
Tip
You may obtain better results by adjusting the focus manually when recording the following:
) tab
"
"
) or Return (
) or (
) tab to adjust the focus.
/
) appears in the
page 23
) tab.
<Nearer subject>
<Further subject>
EV
Focus
Digital Effect
3/5
Fader
Focus
Auto
Manual
1/1
Touch Point
Manual
30CM
Advertisement
Table of Contents
