Advertisement
BSWT-6T Loudspeaker Installation Guide
Item Number
2131000137
1 Contents of the delivery
2 Dimension and mounting details
•
Fastening the rear box to wall or ceiling by using the 4xscrew 3.7 x 15mm stainless steel
or other suitable screws depending on the material of the surface
•
Lead the cable through the cable inlet side by knocking out the two Ø20 holes or by using cable gland type
M20. Cable inlet rear by knocking out two Ø20
If the rear cable inlet is used and the loudspeaker is mounted on plane surface, the rubber ring
Observe
will replace cable glands
Item Name
Description
BSWT-6T
On-wall speaker, 100V, IP65, 6W
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vingtor Stentofon BSWT-6T
Summary of Contents for Vingtor Stentofon BSWT-6T
- Page 1 BSWT-6T Loudspeaker Installation Guide Item Number Item Name Description 2131000137 BSWT-6T On-wall speaker, 100V, IP65, 6W 1 Contents of the delivery 2 Dimension and mounting details • Fastening the rear box to wall or ceiling by using the 4xscrew 3.7 x 15mm stainless steel or other suitable screws depending on the material of the surface •...
-
Page 2: Specifications
3 Connections Do not open loudspeaker when energized Observe • Cable requirements: Approved ships cable 0,5 – 1,5 mm with outer braided tinned copper screen. The screens must be interconnected and grounded in a common ground point in the central unit only •...
Need help?
Do you have a question about the BSWT-6T and is the answer not in the manual?
Questions and answers