Advertisement
L I F E SA F E T Y & I NC I DE N T M AN AGEM EN T
Contact us...
Email:
edwards.fire@fs.utc.com
Web:
edwards-fire.com
1016 Corporate Park Drive
Mebane, NC 27302
EDWARDS is a registered mark in the
United States and other countries.
© 2018 United Technologies Corporation.
All rights reserved.
Page 4 of 4
Specifications
SIGA-270, SIGC-
Catalog Number
270F, SIGC-270B
Single Action
Description
- One Stage
Addressing
Uses 1 Module
Requirements
Standby = 250µA
Operating Current
Activated = 400µA
Construction & Finish
Type Code
Operating Voltage
Storage and Operating
Storage Temperature: -4ºF to 140ºF (-20ºC to 60ºC) Humidity: 0 to 93%
Environment
LED Operation
Compatibility
Agency Listings
Note: SIGC-270F, SIGC-270B and SIGC-270PB are ULC listed only. Suffix "F" indicates French markings.
Suffix "B" indicates English/French biling ual markings.
Ordering Information
Catalog
Number
Description
SIGA-270
One Stage Fire Alarm Station, English Markings - UL/ULC Listed
SIGC-270F
One Stage Fire Alarm Station, French Markings - ULC Listed
SIGC-270B
One Stage Fire Alarm Station, French/English Markings - ULC Listed
Two Stage (Presignal) Fire Alarm Station, English Markings - UL/ULC
SIGA-270P
Listed
SIGC-
Two Stage (Presignal) Fire Alarm Station, French/English Markings
270PB
- ULC Listed
Double Action (One Stage) Fire Alarm Station, English Markings
SIGA-278
- UL/ULC Listed
Accessories
32997
GA Key w/Tag - for pre-signal station (CANADA ONLY)
276-K2
GA Key - for pre-signal station (USA ONLY)
276-K1
Station Reset Key, Supplied with all Key Reset Stations
27165
12 Glass Rods - for SIGA-270 series (CANADA ONLY)
270-GLR
20 Glass Rods - for SIGA-270 series (USA ONLY)
276-GLR
20 Glass Rods - for SIGA-278 series
276B-RSB
Surface Mount Box, Red - for SIGA pull stations
SIGA-270P,
SIGC-270PB
Single Action -Two
Stage (Presignal)
Uses 2 Module
Address
Addresses
Standby = 396µA
Activated = 680µA
Diecast Zinc - Red Epoxy
with aluminum markings
Factory Set
15.2 to 19.95 Vdc (19 Vdc nominal)
Operating Temperature: 32ºF to 120ºF (0ºC to 49ºC)
RH
On-board Green LED - Flashes when polled
On-board Red LED - Flashes w hen in alarm
Use With: Signature Loop Controller
UL, ULC (note 1), MEA, CSFM, FM
D A T A S H E E T
Not to be used for installation purposes.
SIGA-278
Double Action
- One Stage
Uses 1 Module
Address
Standby = 250µA
Activated = 400µA
Lexan - Red with
white markings
Ship Wt.
lbs (kg)
1 (0.5)
0.1 (.05)
1 (0.6)
E85001-0279
Issue 1
Advertisement
