1.1.2.
GPIOs
pullHighGPIO
Pull high the state of
PullLowGPIO
Pull low the state of
getGPIOInterfaces
Get the list string data of interest GPIOs at designed system.
Refer to Table 3-1 GPIOs list
Note:
The pull action is only workable with output pin defined GPIO
The GPIO input pin can notify the application about the status change read by "ELOPeripheralEventListener"
User Manual – I-series 2.0
GPIO-iface
GPIO-iface
disactiveBCR
GPIO
gpio80
gpio81
gpio82
PIN definition
Output
Input
Input
Table 3-1 GPIOs List
UM600183 Rev. A, page 23 of 38