Connections
Wireless Network
You can connect to network with a Wireless IP sharer.
A wireless AP/IP router is required to make a wireless network connection.
Set the network options. (See pages 37~41)
Broadband
service
NOTE
▪
You must use a wireless IP sharer that supports IEEE 802.11 b/g/n. (n is recommended for stable operation of the
wireless network.)
▪
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance,
obstacles, interference by other radio devices, etc).
▪
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
▪
When applying the security key for the AP (wireless IP sharer), only the following is supported.
1)
Authentication Mode : WEP, WPAPSK, WPA2PSK
2)
Encryption Type : WEP, TKIP, AES
▪
For the AllShare function, a PC must be connected in the network as shown in the figure.
English
Wireless IP sharer
Networking with PC for
AllShare function
(See pages 56~57)