Summary of Contents for BC Acoustique TD922
- Page 1 TD922 Bluetooth Turntable © OWNER’S MANUAL MODE D’EMPLOI MANUEL DEL USUARIO BEDIENUNGSANLEITUNG BC ACOUSTIQUE 14 Avenue de l’Europe - 77600 Bussy-Saint-Georges - France...
-
Page 2: Table Of Contents
Introduction Dear Customer, Thank you for choosing a BC Acoustique product. Its implementation has been our know-how, both in terms of design to the manufacturing. Electronic components and mechanical parts correspond to the selection criteria of very high quality. Operation and finish of each product have been checked before delivery. -
Page 3: Recycling Product
BC Acoustique or not BC Acoustics dealer or technician approved, authorized to carry Make sure each cable is correctly inserted. To prevent hum or out maintenance and repair under warranty for BC Acoustique. -
Page 4: Main View And Uses
Warranty Uses ④ STYLUS PRESSURE ADJUSTMENT RING - Some countries do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied Adjusts stylus cartridge’s pressure alignment. warranties. Therefore, the limitations or exclusions herein may not apply. This warranty gives you specific legal rights, ⑤... -
Page 5: Rear Panel And Connections
Uses Connections ⑧ 78 / 45 / 33 - ROTATION SPEED SETTING BUTTONS ② ANALOG (OUTPUTS - RCA) Press these buttons to select the platter’s rotatation according RCA «OUTPUT L and R» are used for connecting the turntable to your speed indicated on the record for 33, 45 or 78 to the RCA analog input on your amplifier. -
Page 6: Preparing The Turntable
Preparing the turntable Make sure the turntable is unplugged from the wall outlet and -7- Set the Antiskating dial to zero. place it on a flat surface so that the groove of the disc can be read accurately. -8- Slide the tone arm clasp to the right to remove it. AT THE FRONT OF THE TURNTABLE -9- Raise the tone arm lifter and shift the tone arm to the left -1- Hold the front edge of the dust cover and gently lift it open... -
Page 7: Operation And Start-Up
Operation and start-up Changing the cartridge AT THE FRONT OF THE TURNTABLE To change the cartridge, first remove the headshell from the -18- Place a record on the turntable platter. When playing a 45 tone arm. Remember to attach the protective cap to protect the RPM large-hole single record, use the included adapter. -
Page 8: Recording With A Computer
Recording with a computer Audacity software installation The sound of your records can be digitally converted on a comu- Connect the turntable to your computer with the USB cord ter by using the USB cable provided in this package to connect supplied with the device. -
Page 9: Specifications And Accessories
Audacity software installation Cartridge specifications Audio-Technica AT-3600 L Cell type: MM Stylus Shape: Elliptical Recommended Load Impedance: 47k ohms Diamond size: 0.6 mm Bonded Round Shank Output voltage: 2.5 mV (± 3dB at 1kHz) Frequency response: 20 - 20,000 Hz Channel balance <... -
Page 10: Notes About Records
Notes about records Troubleshooting HANDLING RECORDS Here you will find a number of fault description and possible Never touch the playback side of the record. Hold the record by solutions we invite you to read in order to ensure the possibility the edge, so as not to leave fingerprints on the surface. -
Page 11: Notes
© In the event that you are unable to connect your turntable with Bluetooth speakers (such as the BC Acoustique SP-102-BT), © we invite you to use the stereo RCA cable supplied with the turntable to connect it directly to analog input of your active speaker. - Page 12 BC ACOUSTIQUE 14 Avenue de l’Europe 77600 Bussy Saint-Georges - France www.bc-acoustique.com...