Download Print this page
Pioneer AVH-X5800DAB Firmware Update Instructions
Pioneer AVH-X5800DAB Firmware Update Instructions

Pioneer AVH-X5800DAB Firmware Update Instructions

Hide thumbs Also See for AVH-X5800DAB:

Advertisement

Quick Links

System Firmware Update Instructions for
AVH-X5800BT
AVH-X5800DAB
AVH-X4800DVD
AVH-X3800DAB
AVH-X2800BT
AVH-X1800DVD
REMARKS:
If you have any difficulty carrying out these instructions, please contact Pioneer Customer
Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
Please download and print these instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order
described below.
DO NOT turn off your unit or disconnect the USB storage device while the firmware is
being updated.
You can only update the firmware when the vehicle is stopped and the parking brake is
engaged.
This firmware update applies only to the above listed models of Pioneer DVD Receivers
sold in Europe and Russia only. In case you have a US model, please visit
'pioneerelectronics.com/firmware' to download the correct firmware file
Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version
number.
1. Start the vehicle engine.
2. Press the [Home] button.
3. Touch the keys in the following order.
The "System" screen appears
4. Scroll down the list and touch [System Information], next Touch [Firmware
information].
5. After the "Firmware Information" screen appears, check the firmware version.
6. Verify that the firmware on your unit is not already 8.18.
7. If the firmware version is 8.18 or higher, it is not necessary to update the firmware.
If the version number is lower than 8.18, it is necessary to update the firmware.

Advertisement

loading

Summary of Contents for Pioneer AVH-X5800DAB

  • Page 1 You can only update the firmware when the vehicle is stopped and the parking brake is engaged. This firmware update applies only to the above listed models of Pioneer DVD Receivers sold in Europe and Russia only. In case you have a US model, please visit ‘pioneerelectronics.com/firmware’...
  • Page 2 B. Updating the firmware on your Unit IMPORTANT Please DO NOT perform this firmware update if the model number of your Pioneer DVD Receiver is anything other then the above listed model. (The model number of your unit can be found in the lower or upper right corner of the front panel.) Ensure that the update file is located within the root (top) folder of your USB storage device.
  • Page 3 After it has finished rebooting, the screen will return to the menu screen. 11. The firmware update is now complete. Your Pioneer DVD Receiver is now ready for use. Firmware Update FAQ Q: What if my set does not switch on automatically after updating the software or starts up more than once? A: Turn off the ignition key and turn on again –...

This manual is also suitable for:

Avh-x3800dabAvh-x5800btAvh-x4800dvdAvh-x2800btAvh-x1800dvd