Troubleshooting; Solving Other Problems - Samsung SCX-4824FN User Manual

MESSAGE MEANING
A toner cartridge has
Toner Exhausted
reached its estimated
cartridge life. The
printer stops printing.
Estimated
cartridge life
means the
expected or
estimated toner
cartridge life, which
indicates the average
capacity of print-outs
and is designed
pursuant to ISO/IEC
19752. (See
Specification on page
83.) The number of
pages may be
affected by operating
environment, printing
interval, media type,
and media size. Some
amount of toner may
remain in the cartridge
even when "Toner
Exhausted" appears
and the printer stops
printing.
Small amount of toner
Toner Low
is left in the cartridge.
The estimated
cartridge life of toner
is close.
This message
Updating Data
appears when there is
Please Wait...
a change in the
system setting or
when you back up a
data.

70 _Troubleshooting

SUGGESTED
SOLUTIONS
Replace the toner
cartridge. (See page 61.)
Prepare a new cartridge
for replacement. You may
temporarily increase the
printing quality by
redistributing the toner.
(See page 60.)
Do not turn the power off
when this message is
showing. Changes may
not be saved and datas
can be lost.

SOLVING OTHER PROBLEMS

The following chart lists some conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem is
corrected. If the problem persists, call for service.
Paper feeding
CONDITION
Clear the paper jam. See page 64.
Paper is jammed
during printing.
• Ensure there is not too much paper in the tray.
Paper sticks
The tray can hold up to 250 sheets of paper,
together.
depending on the thickness of your paper.
• Make sure that you are using the correct type
of paper. See page 36.
• Remove paper from the tray and flex or fan the
paper.
• Humid conditions may cause some paper to
stick together.
• Different types of paper may be stacked in the
Multiple sheets of
tray. Load paper of only one type, size, and
paper do not feed.
weight.
• If multiple sheets have caused a paper jam,
clear the paper jam. See page 64.
• Remove any obstructions from inside the
Paper does not feed
machine.
into the machine.
• Paper has not been loaded correctly. Remove
paper from the tray and reload it correctly.
• There is too much paper in the tray. Remove
excess paper from the tray.
• The paper is too thick. Use only paper that
meets the specifications required by the
machine. See page 31.
• If an original does not feed into the machine,
the ADF rubber pad may require to be
replaced. See page 62.
• There is too much paper in the tray. Remove
The paper keeps
excess paper from the tray. If you are printing
jamming.
on special materials, use the manual tray.
• An incorrect type of paper is being used. Use
only paper that meets the specifications
required by the machine. See page 31.
• There may be debris inside the machine. Open
the front cover and remove the debris.
• If an original does not feed into the machine,
the ADF rubber pad may require to be
replaced. See page 62.
Ensure the paper guides are against both sides of
Envelopes skew or
the envelopes.
fail to feed correctly.
SUGGESTED SOLUTIONS