Advertisement
Before saving a program/multi/sequence/patch, its bank letter, number and name must be set. Use the
encoder to increment/decrement the value or letter at the cursor. To move the cursor, click the encoder,
turn it to move the cursor, and click it again.
When you are done, press
command).
A warning will be displayed in case the memory card is damaged, full, incorrectly formatted, or just needs
a little blow on its connectors.
Note that when a patch is overwritten, a backup copy of the previous version is kept. You can use a SD-
card reader on your personal computer to remove the latest version of the patch and restore the backup
copy (Sorry... Ambika does not come with its own version of Norton Commander).
Press
S5 (versions
command) to bring the version manager.
The following commands are available for the select object
copy
(S1) copies the current item to a clipboard. You can use it to temporarily hold in memory a version of a
patch, or to copy a patch from one part to another.
swap
(S2) exchanges the content of the clipboard with the current item. This allows you to quickly go back
and forth between two versions of a patch.
paste
(S3) replaces the current item by the content of the clipboard. Note that there are actually 4 clipboards,
one for patches, one for multis, one for programs and one for sequences.
<<
(S5) reverts the current item to its previous content. This works like the undo function available on most
computer software. For example, if you create an amazing patch, and then load by mistake a preset on top of
it, you can use this function to go back in time and retrieve your creation.
>>
(S6) works like a redo command. You can use it to cancel an undo command and move forwards in the
versions list.
keep
(S7) saves the state of the current item on the undo stack, so that you can get back to it at a later point
in time.
exit
(S8) exits the version manager.
From the library page:
Press
S7
to display more commands:
Press
S1
to bring the system preferences page:
Mutable Instruments | Ambika - User manual
S7 (save
command). If you want to cancel the operation, press
21 of 28
(part 1 program
in the example given above):
S8 (cancel
Advertisement
