Assemble The Propeller - Holystone HS100 Instructions For Use Manual

Assemble the Propeller

Please note that the letter "A " or " B " is printed on each
propeller, and make sure all the propellers are attached in the
correct motor position.
A
B
Replace and Attach the Propellers
1. Remove Propeller Cap.
2. Unscrew the small screw.
3. Pull out the Fixed Ring and Spacer Ring, then pull out the propeller.
4. Attach the correct propeller.
B
A
Attach the propellers with the
ring mark to the motor cover
with ring marks.
Cap
Fixed Ring
Spacer Ring
Propeller
7