Advertisement
The REGULAR-HIGH HEAT, PERM PRESS-
REGULAR-HIGH HEAT, PERM PRESS-
REGULAR-HIGH HEAT, PERM PRESS-
REGULAR-HIGH HEAT, PERM PRESS-
REGULAR-HIGH HEAT, PERM PRESS-
MEDIUM HEAT, and KNITS/DELICATES-
MEDIUM HEAT
MEDIUM HEAT
MEDIUM HEAT
MEDIUM HEAT
KNITS/DELICATES-
KNITS/DELICATES-
KNITS/DELICATES-
KNITS/DELICATES-
LOW HEAT temperature settings may be
LOW HEAT
LOW HEAT
LOW HEAT
LOW HEAT
used with any cycle setting.
• HIGH HEAT is suggested for regular items.
• MEDIUM HEAT is suggested for permanent
press items.
• LOW HEAT is suggested for knit and
delicate items.
Cycle Selection
Cycle Selection
Cycle Selection
Cycle Selection
Cycle Selection
Turn cycle selector clockwise to desired cycle
and setting.
Each cycle ends with a cool down period. The
heat automatically turns off and the load
continues to tumble for 5-10 minutes. This
reduces wrinkling and makes items easier to
handle during unloading.
Drying time varies depending on size and
dampness of load, weight and fabric type.
Room temperature and humidity, type of
installation and electrical voltage or gas
pressure can also affect drying time.
Timed Dry Cycle
Timed Dry Cycle
Timed Dry Cycle
Timed Dry Cycle
Timed Dry Cycle
This cycle provides up to 100 minutes of
drying time at the temperature selection of
your choice.
Automatic Cycle
Automatic Cycle
Automatic Cycle
Automatic Cycle
Automatic Cycle
This cycle is best for regular and permanent
press items that can be tumble dried. Drying
time is determined automatically at the
temperature selection of your choice.
• For items requiring more drying time, set
cycle selector on MORE DRY
MORE DRY
MORE DRY
MORE DRY
MORE DRY.
• For items requiring less drying time, set
LESS DRY
LESS DRY
cycle selector on LESS DRY
LESS DRY.
LESS DRY
This cycle is best for items of similar fabric,
weight and construction.
Energy Saving Tips
Energy Saving Tips
Energy Saving Tips
Energy Saving Tips
Energy Saving Tips
• Keep the lint screen clean and exhaust the
dryer correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose an
automatic dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small
loads usually take longer to dry.
• Avoid overloading, adding wet items to a
partially dry load, and overdrying.
• Dry one load after another to take
advantage of a warm dryer.
• Opening the door needlessly causes warm
air to escape, which prolongs drying time.
• If possible, use the dryer on low humidity
days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
P/N 131526300 (9511)
Advertisement
