Selecting Energy Saving Mode; Temperature And Humidity Ranges - Samsung AW07FASAA Owner's Instructions Manual

Selecting Energy Saving mode

Remote Control
Control Panel

Temperature and Humidity Ranges

The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
Mode
Cooling
If the air conditioner is used at...
Higher temperatures
Lower temperatures
Higher humidity levels
14
E-
If you wish to save energy when using your air conditioner,
select the energy saving mode with the Energy Saver button.
1 To select the energy saving mode, press the Energy Saver button on the remote
control or unit one or more times until the Energy Saver indicator lights up.
Result: The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
If you would like the air conditioner to run in Fan mode, do not press
the Energy Saver button. You cannot use the Fan mode in the energy
saving mode.
2 To stop the energy saving mode, press the Energy Saver button on the
remote control or unit again.
Result: The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
Indoor Temperature Outdoor Temperature
21°C to 32°C approx. 21°C to 43°C approx.
21°C to 54°C approx.(Middle East)
Then...
The automatic protection feature may be triggered and the air
conditioner stopped.
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Water may condense on and drip from the surface of the unit if
it is used for long periods.
Indoor Humidity
80% or less