Badger Basket Heirloom Style Doll Cradle 1835 Assembly Instructions

Badger Basket Heirloom Style Doll Cradle 1835 Assembly Instructions

Heirloom style doll cradle

Advertisement

Quick Links

MODEL #: 01835
NAME:
Heirloom Style Doll Cradle

TOOLS NEEDED:

Allen Wrench (included)
You can use your own power screwdriver
with allen head, but be careful not to strip
the screws or damage the product.

PARTS INCLUDED:

(A) 2 - End Panels
(B) 2 - Side Rails
(C) 14 - Bolts (not shown)
(D) 1 - Bottom Panel
(E) 2 - Side Panels
(F) 3 - Bottom Rails
(G) 1 - Fabric Mattress
(H) 1 - Fabric Pillow
(I) 1 - Fabric Blanket
hardware listed above are included.
If anything is missing, please do
not return the product to the store.
Call or e-mail us for assistance.
Not for children under three (3) years of age.
Please make sure children know that this
furniture is for dolls and stuffed animals
only. It is not to be used with real infants
or with pets. Children should NEVER
attempt to sit or stand on the cradle.
Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)
PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 715-352-2311 Fax: 715-352-3163
Page 1 of 2

BEFORE YOU BEGIN

ASSEMBLY:

Ensure that all the parts and

WARNING !!

Visit us online at www.badgerbasket.com
CORPORATE OFFICE: 111 Lions Dr., Suite 220, Barrington, IL 60010
ASSEMBLY INSTRUCTIONS
Save these instructions for future use.
For children ages three (3) years and older.
Wipe the cradle clean with a damp cloth and mild soap
as needed. Fabric parts are poly/cotton. We recommend
spot cleaning or hand wash and air dry as needed.
G
B
F
H
cs@badgerbasket.com
Adult Assembly Required
This item is a toy for dolls only.

CARE INSTRUCTIONS:

D
A
I
E
PICTURE 5
1.0/0605

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Heirloom Style Doll Cradle 1835 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Badger Basket Heirloom Style Doll Cradle 1835

  • Page 1 MODEL #: 01835 NAME: Heirloom Style Doll Cradle TOOLS NEEDED: Allen Wrench (included) You can use your own power screwdriver with allen head, but be careful not to strip the screws or damage the product. PARTS INCLUDED: (A) 2 - End Panels (B) 2 - Side Rails (C) 14 - Bolts (not shown) (D) 1 - Bottom Panel...
  • Page 2 PICTURE 1 PICTURE 2 STEP 1: See PICTURE 1. Take ONE END PANEL (A) and attach the TWO SIDE RAILS (B) using FOUR BOLTS (C). The grooves on all the panels face in, are on the bottom, and must be lined up with each other. The countersunk holes on the end panel, and on all panels throughout, face out so the heads of the bolts will be flush with the surface of the panel after being screwed in.

Table of Contents