Educational Insights CoinStruction EI-4039 Manual

Basic and Starter Shapes
Use these illustrations to build basic and "starter" shapes. Once
you know how to build these basic shapes, you will be able to
build anything your imagination allows! Remember, not all kits
have every kind of connector. Check the description to the right
to see which connectors are included in this kit.
Single Plane Matrix
Using 2-way connectors
Cube
Using 2-way and
90° connectors
Hub
Using 2-way connectors
Hub
Using 2-way connectors,
attach coin-to-connector
and connector-to-connector.
Extra Strength
By doubling connectors you can
strengthen any connection.
(This shows two 4-way connectors.)
Building a Biplane
Tail Assembly
STEP
1
8 8
1a
4 1 penny
1a
1b
Wing Assembly
STEP
3
44
4
Top View
2X
Front View
Side View
Coins needed to build your biplane: Coinstruction connectors needed to build your biplane:
(51) pennies (2) nickels
(75) 2-way
1b 1c
8 pennies 4 2 4 pennies
2X
1c
1b
30 pennies
(35) 90°
Rudder Assembly to Tail
STEP
2
6 3 pennies
3X
1a
Connect the three
1b
rudders to the left,
right, and top-back of
the tail assembly as shown.
1c
1b