Multi-Function (Mf) Button; Manual Programming - Unilux VFC User Manual

Multi-Function (MF) Button

The MF button acts as the navigation button on your thermostat. Pressing
MF will cycle through the following operating modes (from left to right,
top to bottom), which light up when toggled to:
• P HOLD (Permanent Hold)
• T HOLD (Temporary Hold)
• On Schedule
• Auto, Low, Med, High Fan
• Heat, Cool, Vacation, Off Modes
•

Manual Programming

When on the operating mode you want, press OK to accept it. If there is
another layer to the mode, it will appear in the display. Multiple choice
can be scrolled through with the Up & Down buttons. Press OK to accept
the new setting. Escape will return to the main screen at any point.
Manual Programming
Manually program the thermostat with 4 programs a day, 7 days a week.
Press MF 12 times to reach Program 1
1.
2. Using Down, select which program you'd like to schedule (1 through 4)
3. Select the day (Sun-Sat) you want to adjust by pressing Up,
then press OK
4. Use the Up and Down arrows to select the time for the program
- Set up the hour first, press OK. Then, set up minute in ¼ hours
and press OK.
5. Adjust the heat temperature set point by pressing Up or Down,
then press OK
6. Adjust the cool temperature set point by pressing Up or Down,
then press OK
Repeat the steps above to add more programs.
6
Your Comfort is Our Business