Suncom Animation Station User Manual page 5

How to/look up your Animation Station
For the Commodore 64. plug your Animation Station line into Control Port # 1 on
the right-hand side. For the Apple lie and lie. plug the lille that comes out of your
Animation Station into the externaf9-pin joystick port.
If
you are using an Apple II
or Apple 11+. use the enclosed Suncom SFAI cable adaptor. Plug the pad line into
one end of the· adaptor and plug the other end of the adaptor into the 16-pin
I/O port on the circuit board. .
~---
......
-.-~--
....
SFAI
ANllllATION STATION
WARNINGION THE APPLE II AND 11+, MAKE SURE THAT THE
COMPUTER IS I!FF BEFORE YOU PLUG IN THE SFAI.
A note-on different computers
Hookup procedures. as well as loading and using the Oesignlab program. differ
slightly from one computer to another. Notes relevant to your particular system are
added to the text where appropriate.
Hardware Requirements
The Animation Station runs on the Commodore 64. and on the Apple II, 11+. lie.
and lie with a minimum of 48k.
3