Spray; Line - Suncom Animation Station User Manual

Title: SPRAY
•••••••••••••••••••••••••••
This option simulates an airbrush: you can "spray" pilelsof color onto the screen.
The "coat" of pilels can be thick or thin.
If
you want to spray in a color different
from the one with which you are presently drawing, go back to the
COLOR
option.
1. Choose the
SPRA
Y option, then place the cursor on the area you want to spray.
Press and hold down
BOTTOM BUTTON.
Move the stylus without lihing it. Color
will appear on the screen· everywhere you move the cursor. To spray a '1hin" coat,
move the cursor once over the area you wadf to color. To.spraya '1hick" coat,
• miJvethe cursor several times over the same area.
2.
Now let's draw some straight lines. Press a
BOTTOM Bb "ON
to get /Jack
to tlie
MAIN MENU,
then go back to
COLOR
and ch!"":e
WHITE
again. Also,
don
1
forgel that brush-type choice will affect the appearance of the lines.
Title: LINE
.,. Choose the
LINE
option.
2. Place the cursor anywhere on the
screen, then press and release a
BOTTOM BUTTON.
3. Move the cursor to any other point
on the screen, and a "rubber-banding"
line will appear to stretch and contract
between the initial touch-point and
. the point where the cursor is now.
17