Seuic AutoID 9 Manual page 88

2．Import QR
This feature can import the external configuration files by scanning
the 2D code, and you can also launch the camera to scan other external
2D code to import configuration files.
(1) Enter Once configure and tap Import QR. Place the QR code
you want to import within the scan frame, as shown in the figure
below:
(2) After the successful transmission of the scan, the items and status
of the 2D code are displayed. Tap OK and then Restart will be prompted.
Tap Restart now (Some configurations will not take effect immediately
without restart).
Figure 8-33 2D code import window
86