Seuic AutoID 9 Manual page 28

specified blacklist, and displaying the current list status. Enter the correct
SSID number to add the black/white list; enter the serial number of AP to
delete the specified white/black list; enter 0 to delete all (The AP serial
number can viewed by displaying the current list status).
Note: when the device is connected to a Wi-Fi network, the
connected Wi-Fi icon
signal strength ( indicated by the number of bands that light up). If you
touch the Wi-Fi network that is currently connected to the device, its
name, status, speed, signal strength, security information, and IP address
will be displayed.
If you want to remove the wireless network settings on your device,
touch and hold the connected AP, and then select to forget network and
delete this AP, as shown in the figure:
Figure 7-12 Configure blacklist and whitelist
will display in the status bar and shows you the
26