Table of Contents
Advertisement
5
Turn the head band over so that the threads of the ball
joint face to the other way, and the AiRScouter logos on
the head band covers are upside-down.
6
Remove the two head band covers as shown, by
pressing the area highlighted in the image below and
sliding the cover to the end of the head band. Swap the
two covers and replace them as shown, so that the
AiRScouter logos are now facing the correct direction.
7
Attach the flexible arm for right-eyed viewing (the other
arm that is included in the box) to the head display, by
lining up the narrow end of the flexible arm with the
threads on the head display, and rotating the dial on the
ball joint clockwise to tighten.
24
Advertisement
Table of Contents
