Zte MF190J Quick Manual

Introduction
The ZTE USB modem is a multi-mode USB modem, working in HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM
networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem
and a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data and
SMS services through the mobile phone network, enabling you to communicate anytime and anywhere.
USB Modem
Specification
The following table shows the specification of your device.
Quick Guide
Interface Type
Systems supported
MF190J
Operating systems
supported
Functions
Network Standards
Transmission speed (Max)
Temperature
Dimension
Weight
microSD capacity
Notes: microSD
Getting to know your device
USB 2.0 HIGH SPEED
The following figure shows the appearance of
Supports most types of laptop and desktop PC.
the MF196. It is only for your reference. The
Windows XP(SP2 or later), Vista(32bit or 64bit), Windows 7
actual product may be different.
MAC 10.4 or later
SMS service, Data service, Applications management, support microSD card, etc.
HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM
Hardware Installation
HSUPA: 5.76 Mbps UL HSDPA: 21.6 Mbps DL
Storage: -40 °C ~ +80 °C Operation:-10 °C ~ +55 °C 1. Put finger on the bottom finger grip, and then lift the front cover of the modem to release and remove.
Notes: Do not open the front cover rudely to avoid the damage of the front cover.
90 mm×27 mm×11 mm
About 22 g
2. Insert the SIM/USIM card and microSD card.
Up to 32GByte
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and
is a trademark of SD Card Association.
then insert the microSD card, shown as the following picture.
Notes: The modem only supports microSD card.
1. Indicator
3. Insert the microSD card into the microSD card slot.
2. Front Cover
Notes: This modem only supports microSD card.
3. Modem Cap
4. SIM/USIM card slot
Insert your microSD card into the microSD card slot, shown as the following picture.
5. microSD card slot
6. USB Connector
4. Close the front cover as shown in the following picture.
5. Connect the Modem to your laptop or desktop PC.
Plug the USB connector into your computer's USB port and make sure that it is tightly inserted.
u
The OS will automatically recognize the new hardware and start the
u
installation wizard.
Warning and Notice
To the owner
• Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately
shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before
using the modem if necessary.