Related Manuals for AVGO NOXOX
Summary of Contents for AVGO NOXOX
- Page 1 AVGO 1080p IP Wi-Fi Mini Indoor Security Camera - White HOUSEHOLD USE ONLY Made In China...
- Page 2 1. Software download ① Go to www.eyecloud.so to download the APP. ② Search Eyecloud in APP Store, Android market etc. ③ Scan the QR code below to download. 2. Register ① For Android/IOS APP,click on "Register now", create a user name and password to finish register. ②...
- Page 3 3. Add cameras to the network Note: If it failed to add the camera by the ‘Scan QR code’, please choose the Method Two in the ‘Others’ to add the camera. 3.1 Scan QR Code Please power on the camera, wait until the reboot of the camera is finished (it takes about 30 seconds), then the camera will say "Please use APP for W i F i configuration"...
- Page 4 ① Enter the APP, click the "+" on the top right corner, click on "Scan QR Code" to scan the QR Code on the camera’s body ; ② Once the camera says “Please use APP for WiFi configuration” for the first time, please click on the “Heard Voice”...
- Page 5 ③ During the configuration, please keep the phone and the camera within 2 meters (at this time, please maximize the volume of the mobile phone). Click the “Send” button on the APP, to send the configuration signal to the camera ④...
- Page 7 Note: During this process, if it prompts that WiFi configured successfully but the binding page does not pop up, please return to the “Add Camera” page, to select “Others→ IP Camera→ Search in LAN” or “Manually add” to bind the camera 3.2 Other ways of adding If no QR code can be found on the body of the device, please choose the 'Others' to add the camera.
- Page 8 During this process, if it prompts that WiFi is Note: configured successfully but the binding page does not pop up, please return to the “Add Camera “ page, select the ‘Search in LAN’ or "Manually add" to bind the camera. Method Two: ①...
- Page 9 Please make sure the phone and camera are under the same router.
- Page 10 FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC'S RF exposure guidelines, place the product at least 20cm from nearby persons...
- Page 11 ② Login the APP, click on the “+” in the top right corner, choose “Others” → “IP Camera” Search Camera in LAN： ① Click on “Search in LAN”, you can find all the available cameras in the same router with the smartphone. If added successfully, the camera can be added via the same way by other users (with different accounts).
- Page 13 ② The binding page will pop up after about 30 seconds, if it does not pop up, then please return to the “Add camera” page, select the "Manually add" method to add the camera. Manually add a camera: After select "Manually add", please input camera's UID(15 digits, can be found on the label stick to the camera's body), or scan the QR code on the camera's bottom sticker, the UID will be auto filled in, then put...
- Page 14 Note: After the camera has been added by Method Two, if you want to make the camera work in WiFi mode, please follow the steps below: ① In the home page of the APP, click in the top right corner of the camera→ choose Parameter Settings→ WiFi Setting, select the WiFi that the smartphone/tablet is connecting to, then input the WiFi password, click on “done”...
- Page 15 Unplug the network cable, the camera will reboot automatically… Note: If setup failed, please refer to the network cable connection method or change a router to setup again.
- Page 16 Parameter settings of cameras In the home page of the APP, click the in the top right corner, then go to "Parameter Settings", you will get the following menus: ① Camera Setting: You can see the camera's basic information, set up the wireless connection, modify password, upgrade firmware, reboot and delete the camera.
- Page 17 Q：How to reset the camera to factory default setting? A：Hold the reset button for about 10 seconds to reset camera. Camera’s default password: 888888 (To improve the security, it is highly recommended that you modify the password of the camera). Q: Any tips for WiFi connection? A : Camera support only 2.4G frequency signal, and 802.11b/g/n WiFi network.
- Page 18 This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the NOXOX and is the answer not in the manual?
Questions and answers