Gavita Pro 6-750e DE FLEX Manual

E series

Advertisement

Quick Links

Pro
line
Gavita Pro
1.
Introduction
Thank you for purchasing the Gavita Pro 6-750
manual completely before using the product. Only use the product as specified in this manual.
1.1.
Used symbols
Warning! A warning indicates severe damage to the user and/or product may occur when a procedure is not carried out
as described.
Caution! A caution sign indicates problems may occur if a procedure is not carried out as described. It may also serve as
a reminder to the user.
Note: A note gives additional information, e.g. for a procedure.
This symbol indicates that the reflector and lamp can reach very high temperatures (>85 °Celsius / >185 °Fahrenheit).
Mind a cool down period before performing maintenance.
The symbol on the material, accessories or packaging indicates that this product may not be discarded as household
waste. By disposing of the equipment in the proper way, you will be helping to prevent possible risks to the environment
and public health, which might otherwise be caused by improper handling of the discarded equipment. Recycling of
materials contributes to the conservation of natural resources. Therefore, please do not dispose of your old electronics
and electrical appliances via household waste.
This symbol is an internationally recognized symbol used to designate recyclable materials.
This symbol is a certification mark employed on electronic products manufactured or sold in the United States which
certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications
Commission.
This symbol shows that a product has been independently tested and certified to meet recognized standards for safety.
A
This symbol indicates the minimum distance (B) between the fixturetype (A) and the lit surface.
B
2.

Product description

The Gavita Pro 6-750
DE FLEX US can be used to drive one double ended 750 W 400 V high frequency (electronic) high pressure sodium lamp. The
Gavita Pro 1000
e
DE US can be used to drive a double ended 1000 W 400 V high frequency (electronic) high pressure sodium
lamp.
The Gavita Pro 6-750
by a Gavita Master controller. The controller can automatically switch the fixture on and off during a 24 hour cycle.
The controller also offers a temperature safety feature, dimming or switching off connected fixtures when the temperature in a
climate room becomes too high.
The product can also be controlled by hand or by conventional timers in combination with a contactor.
In this manual, the Gavita Pro 6-750
3.
Product information and specifications
3.1.
General product information
Product name
Manufacturer
Version
EAN Code
Part number
Plug type
e
6-750
e
DE FLEX US or the Gavita Pro 1000
DE FLEX US and the Gavita Pro 1000
e
DE and the Gavita Pro 1000
e
DE US and the Gavita Pro 1000
e
Pro 6-750
Gavita International bv
120 V
8718403053272
18.60.74.14.20
Nema 5-15
DE FLEX / 1000
DE US are adjustable horticultural fixtures. The Gavita Pro 6-750
e
DE are e-series products. They can be remotely switched and adjusted
e
DE US will be referred to as: "the fixture".
e
DE FLEX US
e
240 V
Nema 6-15
e
DE US
e
DE US. Please read and understand this
Pro 1000
DE US
e
120 V
240 V
8718403053333
18.60.14.14.20
Nema 5-15
Nema 6-15
e

Advertisement

Table of Contents
loading

Summary of Contents for Gavita Pro 6-750e DE FLEX

  • Page 1: Product Description

    DE are e-series products. They can be remotely switched and adjusted by a Gavita Master controller. The controller can automatically switch the fixture on and off during a 24 hour cycle. The controller also offers a temperature safety feature, dimming or switching off connected fixtures when the temperature in a climate room becomes too high.
  • Page 2 Replacement reflector Gavita MD 135 DE HC 30.07.13.00 Gavita W 150 DE 31.26.13.00 Gavita Pro Plus 1000 W EL DE HPS 26.10.16.12 Compatible lamps Gavita Pro 6-750 W EL DE FLEX HPS 26.74.19.11 Power cord US 120 V, 5 meter / 16 ft 44.30.41.11...
  • Page 3: Safety Recommendations And Warnings

    Threeway control cable splitter (3xRJ) 2x Interconnect/ drop cable (RJ/RJ ) Cable length: 1.5 m / 5 ft Gavita Pro 6-750 W / 1000 W EL 400 V lamp Power cord with either NEMA 5-15 or Gavita W 150 DE...
  • Page 4: Installing The Fixture

    40 in connecting fixtures to a controller, consult the controller manual. • Switch the power selector knob on the Gavita ballast to the “EXT” (5) position. • Connect the controller to the included RJ splitter (4D) using the controller’s connection cable (4C).
  • Page 5: Status Indications

    Troubleshooting using the status LED The multi colour status LED provides information on the condition of the controller and the lamp. Consult table 1 and 2 to interpret the status LED. LED signals are represented by colored dots. - All operating modes include GREEN; - All warning codes include RED;...
  • Page 6 Caution! Do not touch the lamp with bare hands as this will damage the lamp. Always use a fabric glove to handle the lamp. Caution! Only use lamps specified by Gavita (see paragraph 3.3). Note: The lamp must be replaced every year or after 5000 lighting hours, whichever one comes first.
  • Page 7 Warning! Always allow for a cool down period of at least 30 minutes before touching the lamp or reflector. Note: Gavita recommends replacing the reflector* after 5000 lighting hours. Depending on the environment and contamination levels the reflector will degrade.
  • Page 8 (3) years from the original date of purchase. If the product shows any defects within this period and that defect is not due to user error or improper use Gavita International bv shall, at its discretion, either replace or repair the product using suitable new or reconditioned products or parts.

This manual is also suitable for:

Pro 1000e de usPro 750 e de us

Table of Contents