Mercedes-Benz 380 SE 1984 Owner's Manual page 45

Note:
This is a 24 hour clock and time
must be entered in all four digits.
A 24 hour clock counts time from
midnight to midnight, that is 24
hours. A time of 4:28 PM therefore is
counted by this clock as 16:28
hours (12 plus 4:28 hours).
Example 1: To enter 7:30 AM,
press buttons
EQ > EQ > E li > EZ3
Example 2: To enter 4:28 PM,
press buttons
EC . Si , E 33
The time entered is now stored. To
start the clock in accordance with a
time signal or other time reference,
again briefly press the recessed
time set button
A colon sign will appear between
the second and third digits
to indicate that the clock is actived.
Normally, the display panel will show
the frequency the radio is tuned to.
To display time
Briefly press the call button Q .
The time will be displayed for a few
seconds.
To use the timer D
By using the timer
can be automatically turned on at a
preset time. In order to set the
D ,
timer the ignition key must be
in position "1" or "2". The timer D i
ED
can only turn the radio on with the
ignition switch in position "1" or "2".
Setting the timer
Press button D
desired turn-on time into the timer
as explained under "setting of the
,
clock". In order to start the timer, for
m b w i
instance, to turn the radio on at a
preset time, press button D . T h e
fact that the timer has been started
is shown by displaying a colon
between the second and third digits
of the time.
Whenever you wish to verify the time
at which the timer is set, press
button D . The time will be
displayed in the panel. After a few
seconds, the display will switch
D ,
the radio
back to the station frequency. In
order to change the timer to a
new setting, refer to the above
information.
and key the
Radio