Subscribe to Our Youtube Channel
Related Manuals for Fornelli PIA 60 MERIDIANA
Summary of Contents for Fornelli PIA 60 MERIDIANA
- Page 1 COMPANY SPECIALIZING IN BUILT-IN OVENS AND HOBS HOBS PIA 60 MERIDIANA INDUCTION USER’S MANUAL...
- Page 2 Installation and Operating Manual Dear Customer! Thank you for purchasing FORNELLI appliance. We hope that this product will meet your expectations and become an excellent assistant in your kitchen. To ensure proper and safe operation of the product, please, carefully read all the provisions of this Manual.
-
Page 3: Table Of Contents
Maintenance and cleaning ....................17 Helpfull hints ......................... 18 Displayed errors and recomendations ................20 INSTALLING THE GLASS-CERAMIC HOB Installation ........................21 Connection to electric mains ..................24 Maintanance and repair ....................25 Warranty service conditions ..................27 ТМ FORNELLI... -
Page 4: Induction Principle
HOBS Installation and Operating Manual Fig. 1 INDUCTION PRINCIPLE This allows the use of cookware of different sizes, The induction cooking technology is based on the provided that the diameter of a specific item corresponds physical principle of magnetic induction. to maximum 10% and minimum 40% of the size of the Key feature of this technology is a direct transfer of serigraphy on the surface of cooking hob (Figure 4) -
Page 5: Safety Instructions And Advises
HOBS Installation and Operating Manual SAFETY INSTRUCTIONS AND ADVISES ever for any and all damages, which may be caused to people and property as a result of inappropriate grounding of the appliance. WARNING! To avoid damage of the The appliance must not be used by children glass-ceramic hob in the cold season, and/or incapable people. - Page 6 HOBS Installation and Operating Manual power cords must be attached to the kitchen est service center. This appliance must be countertops so that they do not come in con- repaired by authorized service center only. tact with hot parts of the glass ceramic hob. Always demand the use of original spare Periodically (at least once every six months), parts for repairs.
-
Page 7: How To Prevent Damage Of The Hob
HOBS Installation and Operating Manual HOW TO PREVENT DAMAGE Always make sure, that acidic liquids, such as vinegar, lemon or lime scale dissolution OF THE HOB agents, do not fall on the glass ceramic hob Glass ceramics is resistant to drastic tem- surface, since these substances leave matte perature changes, being a very strong mate- stains on the surface. -
Page 8: Scope Of Delivery
HOBS Installation and Operating Manual SCOPE OF DELIVERY STORAGE Your glass ceramic hob is a built-in kitchen Store the hob in a dry place, away from appliance. Nameplate containing the model sources of heat and direct sunlight. When of the hob is attached to the rear side of the storing an oven, avoid rapid temperature built-in part of the hob. -
Page 9: Technical Specifications
HOBS Installation and Operating Manual TECHNICAL SPECIFICATIONS Dimensions of the Hob and the Opening for Building-in of the Hob Depth Dimensions of the Hob’s Built-in Part, mm Height Width (length) Dimensions of the Visible Part Dimensions of the built-in part of the hob Niche dimensions 35–45* * When the countertop thickness is less than 35 mm, use the additional sealing tape (to be... -
Page 10: Your New Glass Ceramic Hob
HOBS Installation and Operating Manual YOUR NEW GLASS CERAMIC HOB 1. Front left burner 2. Rear left burner 3. Rear right burner 4. Front right burner 5. Sensor control panel. Fig. 2 CONTROL PANEL Fig. 3 1. Timer 2. Induction burner selector 3. -
Page 11: How To Use Your Induction Hob
HOBS Installation and Operating Manual HOW TO USE YOUR INDUCTION HOB Starting Cooking 1. Touch button. After the appliance is switched-on, you will hear a single audio signal. Symbols “–“ or “––“ will be displayed on all displays. This means, that the induction hob has enter a standby mode. 2. -
Page 12: Using Booster Function
HOBS Installation and Operating Manual 2. Switch off the burner by sliding ginger to “0” position on the slider control. Make sure, that “0” is show on the display. 3. Switch off the entire hob by touching button. 4. Please, be aware of hot surfaces. When an induction burner is hot, symbol will be displayed. -
Page 13: Locking The Controls
HOBS Installation and Operating Manual LOCKING THE CONTROLS SMALL COOKWARE RECOGNITION You can lock the controls of the hob to avoid accidental use of the appliance (such as In the event that an improper-size cook- accidental switching on a burner). ware, or non-magnetic cookware (for ex- ample, aluminum cookware), or some small When the controls are locked, all buttons... - Page 14 HOBS Installation and Operating Manual You may elect to set the timer to switch off one or several in- duction burners upon expiry of a certain time period. You may set timer on 99 minutes. Using a Countdown Timer When selecting one of the induction burners make sure that the hob is OFF.
- Page 15 HOBS Installation and Operating Manual 2. Touch the timer button, figure “10” will be displayed in the tim- er display, while figure “0” will be blinking. 3. Set the timer using slider control (for example, to “5”). 4. Touch the timer button again; figure “1” will start blinking. 5.
-
Page 16: Timer Function
HOBS Installation and Operating Manual 2. Upon expiry of the set time corresponding induction burner will be switched off. The minute display will display the next minimal set time and the red dot of the corresponding heating zone will start blink- ing. - Page 17 HOBS Installation and Operating Manual − Additionally, it is not recommended to Stir-Fry boil sauces based on eggs or with the addition of flour. (Cooking technique in which ingredients are fried in a small amount of very hot oil while − Some cooking methods, including cook- being stirred in a wok) ing of rice with the full water absorption,...
-
Page 18: Sutable Coockware
HOBS Installation and Operating Manual Power/Heating Level Suitable for: 1–2 • Warming up small amounts of food, melting chocolate, but- ter and easily burning foods • Slow boiling at low temperatures • Slow warming up 3–4 • Repeated warming up •... -
Page 19: Maintenance And Cleaning
HOBS Installation and Operating Manual MAINTENANCE AND CLEANING What? How? Warning! Usual contamination Switch off power supply of the hob. – When the hob power supply is off, glass (fingerprints, the residual heat indicator will not Apply a hob cleaner while the traces of food, non- lit, but the induction burner still glass is still warm (but not hot!). -
Page 20: Helpfull Hints
HOBS Installation and Operating Manual MAINTENANCE AND CLEANING What? How? Warning! Spilling of liquids Turn off power supply of the hob. The hob may generate audio signal onto the control Sop up the spilled liquid. and switch off.; control panel may panel Wipe the control panel with a remain inoperable, while there’s a... - Page 21 HOBS Installation and Operating Manual Fault Possible reasons Recommendations Scratches on the glass Irregular cookware bottoms. Use flat bottom cookware (for surface Inappropriate sponges and/ more details see Suitable Cook- or abrasive cleaners have been ware section) used. Some of the cookware This may be caused by specifics This is normal and should not be produce crackling or clicking...
-
Page 22: Displayed Errors And Recomendations
HOBS Installation and Operating Manual Fault Possible reasons Recommendations The hob or one of the induc- This is a technical fault. Please, write down the Error tion burners have suddenly Code, disconnect the hob from switched off, audio alarm has mains and contact qualified ser- triggered, display shows Error vice technician. -
Page 23: Installing The Glass-Ceramic Hob
HOBS Installation and Operating Manual INSTALLING INSTALLATION THE GLASS-CERAMIC HOB Cut out an opening with the dimensions, as shown in Figure below, In the countertop, into WARNING! which you are going to install the hob. The hob must be installed by qualified Ensure that along the entire perimeter of the personnel only. - Page 24 HOBS Installation and Operating Manual A – 760 mm B – 45 mm (min) C – 20 mm (min) D – Air input port E – Air output port 5 mm Before proceeding with the installation of • after the hob is installed, the mains in- the hob, please, make sure that: put switch remains easily accessible;...
- Page 25 HOBS Installation and Operating Manual Before proceeding with WARNING the installation of the fastening kit 1. The hob must be installed by qualified The hob must be placed on solid and flat personnel only! Contact professional surface (don’t use packing), Don’t apply service companies, don’t try to install the force in respect of the control elements, pro- hob yourself.
-
Page 26: Connection To Electric Mains
HOBS Installation and Operating Manual CONNECTION TO ELECTRIC MAINS laid so that in none of its points the tempera- ture would higher than the ambient tempera- Before proceeding with connection of the hob ture by more than 50°C. to electric mains, please, make sure, that: In the event that the power cord needs to be –... -
Page 27: Maintanance And Repair
It is strongly recommended to contact the nearest FORNELLI service center or the shop where you bought the product. If your product is still covered by the manu- facturer’s warranty, then while calling service... - Page 28 HOBS Installation and Operating Manual PIA 60 Meridiana embedding scheme...
-
Page 29: Warranty Service Conditions
Warranty service conditions The products are subject to free repair, if used only agency and signature of a sales assistant (inclu- for personal, family or other needs, not related to ding a tear-off card), model and the serial number business activities, or satisfying household requi- of the product. - Page 30 Warranty service conditions – installation regulations have been violated, as – mechanical damage to the product (scratches, stated in the product manual; cracks, spalls, etc.); – the product has not been timely serviced and – loss of the saleable condition due to impact of maintained, as the product manual requires;...
- Page 32 www.fornelli-tech.com...
Need help?
Do you have a question about the PIA 60 MERIDIANA and is the answer not in the manual?
Questions and answers