Breville Big Squeeze BJS700 Instruction Book page 8

Assembly
ASSEMBLY
1. Firmly insert the compression silicone into
the slot below the pulp spout. The Juicer
may leak if not assembled properly.
2. Assemble the strainer into the rotation
wiper then place this assembly in to the
juicing bowl ensuring the red dot
strainer is aligned with the red dot
juicing bowl.
8
3. Place the juicing screw into the strainer.
Turn and press down on it until it clicks into
place.
The juicing screw needs to be locked in
on the
place in order to close the drum lid.
on the
4. Place the drum lid on to the juicing bowl
aligning the red dot
the red dot
clockwise to close, aligning the red dot
the drum lid with the close mark
.
on the drum lid with
on the juicing bowl. Turn
on