Breville Big Squeeze BJS700 Instruction Book page 15

QUICK RINSING
It is not necessary to completely clean the
juicer in between making multiple juices
during a single juicing session. You can do a
quick rinse instead.
1. With the smart cap closed, fill the juicing
bowl with water and turn on the juicer.
2. Let it run for a moment. Open the smart
cap and let the water run out of the juicing
bowl.
When finished with juicing, always
disassemble and clean thoroughly
between juicing sessions to prevent
residue buildup.
CLEANING SILICONE PARTS
Clean the rotation wiper under running
water. Thoroughly dry after cleaning. Before
assembling the top-set, ensure that the
compression silicone and silicone ring are
firmly inserted.
If the compression silicone and silicone ring
are not firmly inserted, juice may leak from the
bottom of the juicing bowl.
COMPRESSION SILICONE
Unplug to clean.
After cleaning, firmly insert into the slot below
the pulp spout.
SILICONE RING
Remove the silicone ring from the juicing bowl
to clean.
After cleaning, push in the silicone ring with
the smaller surface facing down.
SMART CAP
Remove from the juice spout to clean.
After cleaning, attach the smart cap to the
smart cap silicone on the juice spout.
.
15