Advertisement
INSTALLATION STRAP INSTRUCTIONS
1. Place looped end of strap under platform.
Slot 2
6. Insert the strap through the
Slot 2 with the teeth.
WARNING
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
2. Insert loose end of strap through the loop.
Slot 1
4. Place loose end of strap with clip, under
the top rung of the bottom ladder section.
7. Pull strap to tighten.
DO NOT sit on seat platform until the ratchet and installation straps have been secured.
3. Pull to tighten. Continue with these steps to
install the other strap on the other side of the
platform.
5. Insert the strap through Slot 1 on the clip.
8. Slide the buckles out to the sides to
create tension on the straps.
WWW.TREESTANDCUSTOMERSERVICE.COM
Advertisement
