Siemens S75 Manual page 26

of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
left page (26)
26 Security
¢
T
C
¢
PIN code
¢
Select function.
Change PIN2
Proceed as for
Chg.phonecode
(Change phone code)
You define the phone code
(4 to 8-digit number) the first time
you call up a phone-code protected
function (e.g.
It is then valid for all phone-code
protected functions.
Following the third incorrect at-
tempt, access to the phone code and
the functions that use it is denied. If
this happens please contact Siemens
Service (page 126).
Clearing SIM card
barrings
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the
SIM card in accordance with the in-
structions. If the PUK (MASTER PIN)
has been lost, please contact your
service provider.
¢
Security
Change PIN.
call, page 91).
Direct
Preventing accidental
activation
Even if PIN use is deactivated
(page 20) confirmation is required
to switch on the phone.
This prevents the phone from being
switched on accidentally, e. g. when
carried in a pocket or whilst you are
on an aircraft.
Press and hold.
B
Press. The phone
§OK§
switches on.
Press (or no further input)
§Cancel§
to stop switch-on proce-
dure. The phone does not
switch on.
Connection with PCs
You can connect your phone to a PC
using Bluetooth, an IrDA link, or a da-
ta cable (accessories). The PC pro-
gram MPM (Mobile Phone Manager)
enables you to store data on your PC
and, for example, synchronise the
Addressbook with Outlook®,
Lotus Notes™ and other Siemens
phones (including Gigaset). You will
find Mobile Phone Manager on the
CD-ROM supplied or you can down-
load it from the Internet at:
www.siemens.com/s75