Related Manuals for COLORATO CLAC-600N
Summary of Contents for COLORATO CLAC-600N
- Page 1 INSTRUCTION MANUAL AIR COOLER MODEL: CLAC-600N Read carefully these instructions before using the appliance...
- Page 2 Thank you for your trust and support for choosing our Evaporative Air Cooler. The appearance of the air cooler you are using may not the same as the one in this manual, but this does not influence its operation and use. In order to be able to use this appliance more efficiently, please read this manual carefully before using the appliance and keep it for future reference.
- Page 3 Guide for how to use the cooler Instruction for using control system Functions and operations The cooler has functions: vent, cool, high-middle-low speed switch, swing, pre-cool when cooler on, timer ON/OFF and water lack protection. STANDBY STATE The cooler will be in standby state when power on, with ON/OF icon light and buzzer “Bi”...
- Page 4 TIMER ON/OFF When cooler is running, press TIMER or for timer off function; when in standby, press TIMER for timer on function. Timer ON/OFF can be set between 0.5~7.5 hours with timer icon on. Timer setting steps: 1. When cooler running or in standby, press TIMER or with timer icon flash;...
- Page 5 Circuit drawings Technical parameters Voltage/Frequency (V/Hz) 220-240 /50 Power of motor (W) Speeds of fan Type of fan Centrifugal Air supply (m³/h) 3500 Controller LCD display + Remote control Timer (h) 0.5-7.5 Water consumption (L/H) Air delivery distance (m) Pre-dust filter Available Coverage of indoor areas (m²)
- Page 6 Guide for adding water and draining 1) Adding water: Open the cover as picture and then add water, while watching the water gauge to make sure whether the tank is full of water. NOTE: a. Please do not splash water to motor and other parts to avoid damage to electron components. b.
- Page 7 Trouble shooting Common cause Suggested remedy Problem Connect power correctly Incorrect power connection Air cooler does not Reset circuit breaker or replace it Fuse burnt work Check all electrical connections Loose electrical connections Replace it The knob is broken No airflow Replace it The capacitance is broken...
Need help?
Do you have a question about the CLAC-600N and is the answer not in the manual?
Questions and answers