Page 1
™ OneSpace is a Trademark of Comfort Products, Inc. ASSEMBLY INSTRUCTIONS MODEL 60-5902 SUPPLIER CODE: BJTJ HIGH BACK EXECUTIVE MESH CHAIR WITH HEAD AND LUMBAR SUPPORT CUSTOMER SERVICE For fastest service on claims, request for replacement parts, or questions please visit our website at www.comfortproducts.net/support...
CONTENTS ITEMS ARE NOT SHOWN TO SCALE. PARTS LIST HARDWARE KIT STOCK # 61-5902HA PART DESCRIPTION STOCK# QTY. PART DESCRIPTION QTY. 5/16” x 7/8” Back Cushion 61-5902BC 5/16” x 1-1/4” M8 x 60MM M8 x 75MM Seat Cushion 61-5902SC Armrest (right) 61-5902RA Armrest (left) 61-5902LA...
Page 3
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED STEP 1 STEP 2 Insert the casters (7) into the holes of the star base (6). Insert Align the seat plate (4) over the pre-drilled holes under the Seat the gas lift (5) into the center hole of the star base (6). Cushion (2).
Page 4
STEP 5 TO ADJUST TILT TENSION Attach the Left Armrest (3) to the Seat Cushion (2) using Reach under the front center of the seat and grasp the round screw (C) and to the Back Cushion (1) using screw (D). Repeat black tension knob.
FREQUENTLY ASKED QUESTIONS • WHERE DO I FIND THE MODEL NUMBER AND SUPPLIER CODE FOR MY CHAIR? The chair model number and supplier code is located on a sticker underneath the seat cushion, and on the front page of your instruction manual. •...
• WHAT IS THE WEIGHT LIMIT ON MY CHAIR? The 60-5902 chair has been tested to meet BIFMA standards, and has a weight limit of up to 250 lbs. SAFETY AND MAINTENANCE • DO NOT stand on the chair. DO NOT use the chair as a stepladder.
Page 7
FIGURE A TOOLS NEEDED: (1) Newspaper or cardboard for work area, (2) Silicone lubricant (such as WD40),(3) Rubber Mallet INSTRUCTIONS: 1.) Spread newspaper or cardboard on your work surface. 2.) Turn your chair on its side. 3.) Spray lubricant around the center post where connected to your 5-star base. 4.) Remove casters (wheels) from base.