Aqua Lab Pawkit Quick Start Manual page 9

Do not overfill the sample cup
Warning!
(no more than half full)
Product- Step 3
Ready! Sample Test
1
Place a sample of your product in a new sample cup.
2
Cover the bottom of the sample cup as much as possible.
3
If your product is larger than the cup, it will be necessary
to make the product smaller to fit the sample cup.
4
Ensure the rim and outside of the sample cup are clean.
5 If you don't immediately test the sample, cover it with
a lid to avoid moisture loss or gain.
6
Ensure sample temperature is within 4˚C of the
instrument temperature.
8