Aqua Lab Pawkit Quick Start Manual page 2

The Setup
Congratulations on your new Pawkit
Water Activity Meter. This guide will
help you begin gathering data in just
a few short steps.
Place in a stable environment away
from air ducts, vents, heaters, etc.
Wash hands.
1
Customer support: support@aqualab.com / 509-332-5601 7 a.m.-5 p.m. Pacific
LCD
Displays water activity
value and temperature.
Button I
Power/New Test
button.
Sample Cup
Use a new sample cup
for each test.
Button II
Once a reading is finished,
the right button (II) will
be active. Button II can be
used to adjust the calibra-
tion of the instrument if
it is not measuring within
specifications.
Note: Using button II to adjust
the calibration should only be
done when the instrument is not
measuring within specifications
and has been thoroughly cleaned
and retested with the 0.760
standard.