Ipsec - Caimore CM520-86W User Manual

Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------
----------------------------------------

4.3.3 IPSEC

Connection Mode:
 Initiative Mode：Initiate connection from this side.
 Passive Mode：wait for remote side connection
Remote address：
Transport Mode:
 Transport Mode: usually used when wireless gateway connects server.
 Tunnel Mode：usually used when establishing tunnel between two gateways
 Pass-through Mode：allow IPSEC protocol pass through.
Local end point type:
 Network-To-Network：used communication between equipment of gateway and
equipment of server
 Road Warrior：connect to server as mobile clients end.
 Subnet：It is subnet of both sides when working mode is Network-To-Network
 Next-hop IP： When device is in LAN, then this IP is the IP address of
gateway that the device points to
 IPsec port： when start L2tp at the same time, L2tp monitor port and L2tp
Tel:+86 592 5901215
Picture 4-3-4
Server IP or domain name (compulsive to input)
45 web: en.caimore.com 45