Caimore CM520-86W User Manual page 44

Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------
----------------------------------------
way
Mppe-StateFul: Supply MPPE stateful Encryption.
Add default route： If start this function, all data visited this device will send to PPTP
tunnel. Under this situation, computer host of this device can only visit VPN network.
Enable NAT: If enabled, the device on the local LAN can access the server through the
VPN tunnel. If the device is not enabled, the device on the LAN can not access the
server through the VPN tunnel, but can access the server through the external network.
Other parameters ： Don't need to input usually except service requested special
negotiation parameters.
Specify Local IP /Specify Peer IP: If server allows, this device requests from server to
specify local IP when establish ppp link, if server assigns, it fails to establish tunnel.
Tunnel check interval (second)/Tunnel check times: Once tunnel established, device
can send interval LCP packets to check the link. If checking times fail, device will
disconnect automatically and restart to connect.
Other parameters: it will be used when special parameters are needed to establish link.
It doesn't need to input usually, except for the services with special negotiation
parameters. Parameter format is: novj; novjcomp, use ";" to separate parameters.
Notice：If start "default route", all data packet will be sent to VPN server, that means
equipment can't visit public network. Please revise "keeping online" parameters
according to actual situation. Otherwise, it will be off-line frequently.
Tel:+86 592 5901215 44 web: en.caimore.com 44