Image Shape; Correcting Image Shape With H/V Keystone - Epson EB-L615U User Manual

Image Shape

You can project an even, rectangular image by placing the projector directly
in front of the center of the screen and keeping it level. If you place the
projector at an angle to the screen, or tilt it up or down, or off to the side, you
may need to correct the image shape.
g g Related Links
• "Correcting Image Shape with H/V Keystone"
• "Correcting the Image Shape with Quick Corner"
• "Correcting Image Shape with Arc Correction"

Correcting Image Shape with H/V Keystone

You can use the projector's H/V-Keystone setting to correct the shape of an
image that is unevenly rectangular on the sides.
You cannot combine H/V-Keystone correction with other image shape
a
correction methods.
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
p.49
p.51
p.52
c
Select the Settings menu and press [Enter].
d
Select Geometry Correction and press [Enter].
You can also access the Geometry Correction screen by pressing
a
the up arrow button on the control panel.
e
Select H/V-Keystone and press [Enter]. Then press [Enter] again.
You see the H/V-Keystone adjustment screen:
49