Subscribe to Our Youtube Channel
Related Manuals for Denver OG-2030
Summary of Contents for Denver OG-2030
-
Page 1: Microwave Oven
MICROWAVE OVEN Quickstart guide OG-2030 www.denver-electronics.com IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE English... - Page 2 Household use only To ensure sufficient ventilation, the distance of the back of microwave to the wall should be at least 10 cm, the side to the wall should be at least 5 cm, the free distance above the top surface at least 20 cm. the distance of the microwave to the ground should be at least 85 cm.
- Page 3 Turntable/ Rotation ring/ Rotation axis: Wash with mild soap water Rinse with clean water and allow drying thoroughly .PRODUCT INSTRUCTION …………………………......Waveguide cover 1) Door lock Microwave oven door must be properly closed in order for it to operate 2) Viewing window Allow user to see the cooking status 3) Rotating axis The glass turntable sits on the axis;...
-
Page 4: Operation Of Control Panel
8) Grill rack – use to place the roasting food. OPERATION OF CONTROL PANEL …。 。 。 。 。 。 。 。 。 。 …….... 1) Timer -The max cooking time length that can be set is 30 minutes. - Each setting is 1 minute - A bell ring will be heard when the timer times out and returns to Zero position. - Page 6 Grill-- only heat element is energized. Good brown color will be obtained, even the color makes you mouth water, but if the food is thickly, it may result in the surface of food have been burned, but the center of the food is unbaked. It is suitable for broiling sausage, chicken wings, chops, meat slice, sandwich and etc.
- Page 7 5) Once the desired time is set, the cooking begins. If pausing in between is needed, just open the door at any time, and close it to resume operation 6) When it times out and cooking ends, the microwave oven produces a bell ring, the inside lamp will also be automatically turned off - If food is removed before time out, make sure to set back the...
- Page 8 ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen below.
Need help?
Do you have a question about the OG-2030 and is the answer not in the manual?
Questions and answers