Table of Contents
Advertisement
Quick Links
Dear user,
Thank you very much for purchasing LS533H rotary laser. Please read this instruction manual before operating it.
1. Features and Functions
2. User Safety
4. Operation guide
1. Features and Functions
LS533H full automatic leveling rotary laser could project visible auto-leveling horizontal plane and project laser slope by
setting accurate grade value. It provides exact horizontal and grade preference for indoor and outdoor construction
sampling and calibration with convenient operation and wide usage.
Features
※ 360°rotating, electronic leveling, laser stop rotating and sound indication when out of range.
※ Slope scanning function could set the grade value for the axis accurately.
※ TILT mode has the unleveled alarm function, the laser head stop rotating to insure the construction accuracy when the
instrument is hit.
※ VWS mode could set the instrument to be low sensitive, to insure the reliable wild working performance.
※ LCD display with backlight illumination
※ Accuracy self-calibration function
※ Sleep function
※ Able to connect with the tripod through the 5/8" screw thread
※ Various accessories of elaborate design can bring usage expansion ※ Rainproof and dustproof
2. Usage safety
※Laser output sign lies at the output aperture.
※ Do not stare into laser beam directly
※ Do not disassemble the instrument or attempt to perform any internal servicing. Repairs and servicing could be
performed only by authorized service centers.
※ The instrument complies with the safety classification standards of laser radiation
Contents
Advertisement
Table of Contents
Related Manuals for Bince LS533H
Summary of Contents for Bince LS533H
- Page 1 Dear user, Thank you very much for purchasing LS533H rotary laser. Please read this instruction manual before operating it. Contents 1. Features and Functions 2. User Safety 3. Nomenclature 4. Operation guide 5. Applications 6. Self-Check and Calibration 7. Technical Specifications 8.
- Page 2 3. Nomenclature Laser output window Rotary head Operation keypad Handle LCD display Battery cover screw Battery box 5/8″ thread 4. Operation Instruction 4.1 Battery installation a) Put 3*C alkaline batteries into the battery box follow the marked polarity direction, and install the battery box to the instrument.
- Page 3 4.2 Charge the rechargeable battery Charge the rechargeable battery directly by insert the charger into the charging jack. The LED is red during the charging process; the LED will turn green when the battery is full. Charge the rechargeable battery box directly Charge the rechargeable battery box on the instrument Note：...
- Page 4 4.4 Keypad Channel setting button On/off button TILT mode indication Rotating speed indication VWS mode indication X axis grade value Y axis grade value Remote status indication Power indication Remote channel indication 4.5 On/off button a) Press ON/OFF button, power on the instrument, LCD will display the current status. b) After powering on the instrument, it will test the volume and LCD will display the corresponding battery volume status.
- Page 5 4.7 Grade axis and set position selection button a) Long-press this button (hold more than 2 seconds), enter the X-axis grade setting mode, the X axis symbol (+) will flash. Then short-press this button could move the cursor (the selected position will blink). Press button to change the symbol position or value b) When X axis setting is done, long-press this button to enter the Y-axis grade setting mode, the Y axis symbol (+) will...
- Page 6 Indicates the battery volume is very low, charging is suggested. Indicates the battery volume is empty, need charging. During using 316EH to work with LS533H, when the instrument display , means the remote control function of instrument is on, but there is no matched remote control (the possible cause is: 1) the remote control is off. 2) the distance between the remote control and instrument is too far----over 70m.
- Page 7 b) From the 3 seconds, LCD will display the entrance of the inner menu, if release button now, the instrument will enter the corresponding menu. c) From the 3 to 5 seconds is the entrance of the horizontal calibration interface, release button will make the instrument enter horizontal calibration.
- Page 8 7. Applications 8. Maintenance The instrument should be carefully operated and properly preserved, and any violent shock or falling will possibly result in the damage of instrument. Do not attempt to disassemble the instrument, and the unprofessional disassembly will result in the damage of instrument.
Need help?
Do you have a question about the LS533H and is the answer not in the manual?
Questions and answers