5: Software Modules; Installation; Utilities; Driver - Identiv SCR3310 V2 Reference Manual

5: Software modules

5.1:
On Operating Systems with a PC/SC CCID driver preinstalled, no installation is necessary.
Where there's no PC/SC CCID driver preinstalled (Linux systems) the driver has to be installed
using distribution specific measures or installed using the available source packages.
5.2:
The following utilities are available:
•
A tool for testing the resource manager
•
A tool called PC/SCDiag capable of providing basic information about the reader and
a card through PC/SC stack
5.3:

5.3.1: SCR3310 V2 listing

SCR3310 V2 is listed by PC/SC applications as
•
Identiv SCR3310 V2
SCR3310 V2 uses the PC/SC CCID class driver readily available for all the supported operating
systems.
On Windows XP systems, this driver is not preinstalled and will not be loaded from Windows
Update. The Hardware Wizard will need to be allowed to load the driver from the internet if it is
not already present on the system (first time installation).
Starting with Windows Vista, the OS does have the driver preinstalled, so no additional driver
installation is necessary.
macOS X systems do have the PC/SC CCID driver preinstalled.
On Linux systems, the distribution specific installation mechanism should be used.
Document Version 1.1
Reference Manual for SCR3310 v2 Contact Desktop Reader

Installation

Utilities

Operating systems supported by the tools:
•
Windows Server 2012 (32 & 64 bit)
•
Windows 7, 8.1 and 10 (32 & 64 bit)

Driver

Last revised on 2018-07-19 Page 16 of 40