Table of Contents
Advertisement
1. About this Manual
This manual provides the information necessary to help customers install and operate the CU1
Control Unit. It is one component of the Bartington Instruments Helmholtz Coil System. This
manual should therefore be read in conjunction with:
•
Compatible Helmholtz Coils Operation Manuals
•
PA1 Control Power Amplifier Manual OM3225
•
CU2 Closed-Loop Module (if applicable) OM3999
•
Helmholtz Coil Control Software OM3596.
All manuals are available from the Helmholtz Coil System
products outline drawings can be found on the Helmholtz Coil System
This manual should also be read in conjunction with the product brochure
also be found on the product page.
Photographs of key components are included, labelled with numbers. A number in the text in
square brackets [ ] refers to that label.
Bartington Instruments cannot advise on the integration of this equipment with any third party
products.
1.1. Symbols Glossary
The following symbols used within this manual call your attention to specific types of
information:
WARNING: Indicates a situation in which serious bodily injury or death could result if the
warning is ignored.
Caution: Indicates a situation in which bodily injury or damage to your instrument, or both,
could result if the caution is ignored.
Identifies items that must be disposed of safely to prevent unnecessary damage to the
environment.
Note: A paragraph in this format provides useful supporting information on how to make
better use of your purchase.
BARTINGTON INSTRUMENTS
Page 3 of 21
Operation Manual
page. The relevant
outline drawing
DS2613
page.
which can
OM3224/4
Advertisement
Table of Contents
