Installation Of Indoor, Outdoor Unit - LG A3UW186FA3 Installation Manual

Installation of Indoor, Outdoor Unit

Installation of Indoor, Outdoor Unit
Read completely, then follow step by step.
Select the best location
Indoor unit
1. Do not have any heat or steam near the unit.
2. Select a place where there are no obstacles
in front of the unit.
3. Make sure that condensation drainage can be
conveniently routed away.
4. Do not install near a doorway.
5. Ensure the spaces indicated by arrows from
the wall, ceiling, fence or other obstacles.
6. Use a stud finder to locate studs to prevent
unnecessary damage to the wall.
CAUTION: Install the indoor unit
on the wall where the height from
the floors more than 2.3 meters.
(ART COOL Type Only 1.5m)
Outdoor unit
1. If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure
that heat radiation from the condenser is not
restricted.
2. Ensure that the spaces indicated by arrows
around front, back and side of the unit.
3. Do not place animals and plants in the path
of the warm air.
4. Take the air conditioner weight into account
and select a place where noise and vibration
are minimum.
5. Select a place so that the warm air and noise
from the air conditioner do not disturb
neighbors.
Rooftop Installations:
If the outdoor unit is installed on a roof
structure, be sure to level the unit. Ensure the
roof structure and anchoring method are
adequate for the unit location. Consult local
codes regarding rooftop mounting.
6 Multi Air Conditioner
More than
10cm
More than 20cm
More than 2.3m
More than
10cm
More than 2.3m
More than
10cm
More than 2.3m
More
than 50cm
More than 1.5m
more than 60cm
more than
30cm
more than
70cm
more than 60cm
more than
30cm
more than
70cm
More than
10cm
More than 20cm
More than
10cm
More than 20cm
More than
10cm
More than 20cm
More
than 50cm
more than
30cm
more than
60cm
more than
30cm
more than
60cm